Latest fibre shed Tenders | Government fibre shed Tenders

Central Government/Public Sector

CTN :44977685

29 Apr, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units ,unit no. 19 - small shed near dome , unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. in lot abandoned condemned buildings consisting of released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar , gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian is sse (w) bvp, mode of delivery by weight, deliverable lot qty - 7.683 mt, loading by purchaser. note: 1. delivery of only ferrous material as mentioned qty. in lot will be given. purchaser is not allowed to take leftover ferrous material. 2. all wooden material including released door with chowkhat, released window with chowkhat, zaffry or any other wooden items are reclaimable and needed to submit to the custodian at reclaim area marked in mg workshop. 3. delivery of the material will be given only after submission of reclaimable material 4. purchaser needs to remove debris, bricks, masonary, rubble, ac sheets, manglore tiles from the dismantling sites untill ground is fully clear before taking the delivery. 5. dismantling is permitted up to ground level only. below ground level does not be permitted. cutting is permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 6. after removing/ clearing the rcc/ brick masonary rubbish from the spot only, the delivery of iron material will be affected. 7. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 8. part delivery is not allowed. 9. any mg/bg rail lines or pway scrap with or without attachments lying under or beneath of building/sheds/structures are not deliverable. 10. purchaser need to first dismantle the all buildings/sheds/structures then only delivery will be permitted. fdp 50 days.

Central Government/Public Sector

CTN :44977697

29 Apr, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap g i sheet, ms scrap, gi pipe off size, tie bar, rail off size & m s rod, tmt bar, angle, flat, plates, fencing truss, all off sizes ms scrap, name board 02 nos, small size cover shed.. etc.total lot qty. 40 mt, location - sse works vrl, sse w office, store compound. vrl,cvr & mlha station. cutting allowed at the time of delivery for easy loading only, no sorting allowed. custodian - sse works vrl , mode of delivery - by weight , as is where is basis,loading by purchaser,fdp 50 days.

Central Government And Public Sector

CTN :44964927

30 Apr, 2026 5.46 Lacs

Srinagar - Jammu And Kashmir

Tender For repair and maintenance works of gi poles and temporary cgs shed on sh amarnath yatra route through baltal axis railpathri to kelnar ii for sanjy 2026

Central Government And Public Sector

CTN :44964904

30 Apr, 2026 5.66 Lacs

Pahalgam - Jammu And Kashmir

Tender For repair and maintenance works of gi poles and temporary cgs shed on sh amarnath yatra route through pahalgam axis from pissu top to mg top for the sanjy 2026

corporations/Associations/Others

CTN :44963938

12 May, 2026 NA

Hyderabad - Telangana

Tender For construction of gi sheet shed for car parking at emsd, cherlapally, ecil, hyderabad.

CTN :44976195

30 Apr, 2026 9.10 Lacs

Ambala - Haryana

Tender For p/samiti- constructionuction of community toilet in village naneola and constructionuction of gi shed and stage in stadium village-ballana,block-ambala-1

CTN :44976196

30 Apr, 2026 6.93 Lacs

Ambala - Haryana

Tender For const of gi shed in kabristan in village kaleran,construction. of ipb street from h/o vijendra to h/o virender village sahibpura block ambala i distt ambala

CTN :44969592

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of electricla spares and supplies - 3.7 kw motor rewinding, 4-way jb installation with support — 400w light for planning &, store area, led lights 400w installation with support — planning & store, area and other locaiton as advised, 4c × 4 sq.mm cable laying — mcc to commercial shed, loading/unloading boom-a lcs, conveyor boom-a motor,, bypass conveyor boom-a motor, bypass conveyor boom-b, motor, conveyor boom-b motor and other locaiton as advised, 3c × 2.5 sq.mm cable laying — mcc to commercial shed:, conveyor boom-a lcs, bypass conveyor boom-a lcs, loading &, unloading boom-b lcs, conveyor boom-b lcs, bypass conveyor, boom-b lcs and other locaiton as advised, 75 × 50 mm cable tray angle & support — commercial shed, loading & unloading boom, 4c × 16 sq.mm al cable laying — storage shed du new motor, and other locaiton as advised, 4c × 1.5 sq.mm cable laying — filling shed du new lcs, mcc for, new purging unit, valve changing shed to mcc for new valve, changing machine lcs, dpt shed to mcc for new valve, changing machine lcs, 4c × 2.5 sq.mm cable laying — mcc to 24-head carousel, earthing relay, mcc room to 48-head carousel earthing , to 12-, head carousel earthing, 2c × 1.5 sq.mm cable laying — lpg pump house jb to lcs &, instrument for lpg pump, 12p × 1.5 sq.mm cable laying — lpg pump house jb to jb, instrument for lpg pump, 4c × 4 sq.mm cable laying — lpg pump house to mcc for lpg, pump lcs, 4c × 4 sq.mm cable laying — filling shed to mcc for conveyor, dus, earth pit installation — commercial shed (earth digging, gi pipe, fitting, chamber making, gi busbar, chequer plate frame &, chequer plate), earthing strip laying 50 × 6 mm — commercial shed earth pit to, 47.5 kg filling scale, platform structure — dismantle, filling shed near 24-head, carousel, weight scale unit stand & base frame fabrication & installation, — commercial shed, 4c × 16 sq.mm cable laying — valve changing shed to mcc for, new valve changing machine motor, dpt shed to mcc for new, valve changing machine motor, storage shed to mcc for new, du motor, lpg pump house telephone shifting & cable laying, cable tray 75 × 50 mm laying with angle support — commercial, shed, valve changing shed, storage shed, ms plate 1500 mm × 1500 mm × 6 mm modification &, installation — commercial shed hydraulic jack, lightning arrestor height extension for lps (tt gantry rooftop /, filling shed top), new lightning arrestor installation for lps (filling shed &, commercial shed top), earthing strip dismantling & shifting 50 × 6 mm for earthing grid, msv area / lpg pump house manifold & msv manifold /, planning room / storage shed), earthing strip installation 25 × 3 mm for pipe-end flange (receipt, station fencing — all areas / tt parking area fencing / pump, house manifold & msv manifold), hydrant monitor height extension — dismantling and, installation, pipe cutting and welding with flange (tt parking, area / commercial shed loading and unloading), hydrant monitor structure and platform with railing shifting,, fabrication and installation (tt parking area), hydrant monitor railing fabrication and installation (near, counting platform / near lpg pump house / msv area), gi fencing fabrication and installation (3 m × 2 m) — near, counting platform, earthing strip laying with clamp & fabrication 25 × 3 mm (lpg, pump house shed roof to bottom and other locaiton as advised), water pipe 1" line installation with fitting (commercial shed, composite cylinder area), ovcm vent pipe 1" line modification with flange joint (filling, shed), sprinkler pipe 2" line cleaning & modification with flange joint, (msv top area), commercial shed evacuation — vent pipe 1" line modification &, installation with flange joint, conveyor and gi pipe dismantling work — length 45 mtr., (commercial shed valve changing shed connecting platform), platform installation for valve opening of cylinder (filling shed), stand fabrication &

CTN :44969627

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of mechanical spares and works - 1" u clamp bolt, 1" union, 1"x6m jindal gi pipe, 1.5" barrel nipple, 1.5" brass ball valve, 1.5" gi elbow, 1.5" gi tee, 1.5" gi union, 1/4x12 pu connector, 100x75 allen key bolt, 10mm drill bit, 10x75 gi nut bolt washer, 16mm tap, 16x200 anchor fastener, 212 bearing, 220 gear oil, 25x5 ms flat, 2.5" gasket, 2.5mm ms plate/17 sheet, 2500x470x50 water drop tray, 300x25x5mm ms flat, 3mmx4ftx8ft ms plate, 4x8x5mm acrylic sheet, 5/8x6 ms nut bolt with washer, 5mmx5ftx8ft ms plate, 6 inch bench vice, 6mm hex lock nut with washer, 6x65 allen cap screw, 8x25 bolt, 8x75 bolt, allen m10x75mm hex central column, ambika o ring, appu cake 10 kg event, barrel hand pump, bearing bush, bearing pin, brass bush 1/2x1/4, cake 1 kg for event, clutch drive, cylinder transportation bangalore/ram sir, df oil, momento for events and visitors, dpt conveyor load head, dpt conveyor load head hook, dpt conveyor overhead load head, dpt conveyor u clamp head, dpt shed air compressor local box, festo cylinder 40/300, file 6 inch, gas cutting torch, gasket 48 central column, gd lower bell, gear and shaft 4 inch, gi elbow 1", gi elbow 1.5", gi elbow 1x1/2", gi long bend 1/2", gi nipple 1.5"x2", gi nipple 1.5"x4", gi pipe 1.5" jindal, gi reducer 1x1/2", gi reducer tee 1x1/2", gi reducing elbow 1x1/2", gi saddle cleat 1.5", gi sheet 4x8x1mm, gi socket 1", gi tee 1", gi tee 1.5", gi union 1", gi union 1.5", gm ball valve 1.5", gm float valve with ball 1 inch, gm nrv horizontal 25mm, gm nrv isi screwed 1.5", ht full threaded rod 1m, ht lock nut 16mm, ht nut m16, hydraulic 68 oil, hydraulic hex nipple, hydraulic hose 3/4"x1m, hydraulic hose pipe, hydraulic jack 25 ton, ice pick, joy l150 coupling, l95 coupling with bore, lerc cylinder courier charges bangalore, m seal, metal gasket, ms elbow 150 class, ms reducer 150 class, ms sch 40 b/w elbow 50mm, ms sch 40 reducer, ms socket forged 3/4", nilkamal pallet trolley, nut bolt 6x20, nut bolt 8x40, orange helmet karam, ovcm machine cylinder new, ovcm machine cylinder rod modification, ovcm shaft length work, pneumatic long head silencer 3/4", polish paper, ps paper, pu connector 1/2", pu connector 1/2"x12, pu connector 1/2x1/4, pu connector 1/4x8, pu connector 3/8x8, pu pipe 8mm, pump motor shaft straightning and impeller repair, quarter pin, rubber hydro testing seal, rubber sheet 5mm, rubber washer o packing, sealing unit hose pipe ss grade 2m, seamless pipe 50nb sch 40 js, skf bearing, skf bearing 32206, skf bearing 6012, skf bearing 6024, skf bearing 6026, skf bearing 6303 zz, skf bearing 6304 2z, soap, spider l95, ss ball 150mm od, ss ball valve 1/2" threaded, ss blind flange 6 inch, ss cfb ball valve 1.5", ss cfb ball valve 2", ss nipple 1.5"x6", ss nipple 2"x6", ss rod 8mm, ss sheet 4x8x1mm, ss sheet 4x8x3mm, ss water bottle, sumo o ring, t 8mm, tap handle, taparia 450mm adjustable pipe wrench, teflon trolley wheel 6 inch, tyre coupling, v seal 16/24/5, v seal 22/16/4, washing unit sprinkler, lpg conveyor chain (carbon steel), solenoid valve 1/2" 24v dc, ptfe thread sealant tape 12mm, pressure gauge 0-10 bar 63mm, temperature gauge bi-metal 0-120c, limit switch conveyor roller type, proximity sensor inductive 12mm, stud bolt m20x100 ss316, hex nut m20 ss316, copper crush washer 1" lpg rated, teflon bush 50mm od, nylon roller 100mm dia, torque wrench 1/2" dr 40-200 nm, chain block 2ton, old head guide rod supply, media converter, omron smps, wire rope sling 5t 2m, drill machine check nut, jk drill bit high speed, 4' polish wheel, 10x45 alenkey nut bolt 48 corsol, tube(pu) od4 (blue), tube(pu) od6 (blue), tube(pu) od8 (blue), 1 1/4 5/2 single ext. pilot valve, 1/4 5/2 double ext. pilot valve, or valve g1/4

Central Government/Public Sector

CTN :44964488

29 Apr, 2026 NA

Firozpur - Punjab

Tender For auction sale of others - goods platform shed, pump house no. 09 in colony no. 03, pump house no 12 in colony no 02, block no. 121 (14units) type-i and 124 (11 units) type-i in colony no.01 at firozpur, twb station building, diesel room at twb, phs old station buildings (total 31 units) in the section of sse/w/fzr under aden-i/fzr. total appx. qty.: released old bricks 346160 nos., released old brick bats 643 cum, released old brick tiles 12776 nos., released iron/gi scrap 83130 kg, released wooden scrap (doors/windows) 8 each.

Fibre Shed Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector